cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma iP8720 won't print oversized (13x19) just threads paper

alidoucette
Apprentice

Hello! I'm hoping someone can help me figure out why my Pixma iP8720 won't print oversized. I can print letter size just fine, but as soon as I try to print oversized it just threads the paper, and blinks yellow on the error/thread button.

I'm printing from Lightroom Classic by adding a custom size of 13x19 (not available in the paper size presets). I've just replaced all of the toners with Canon toners so ink isn't low, and I'm using Canon Matte Photo paper. Just printed an 8.5x11 today so communication to printer is working fine.

Looking for any advice, thanks!

3 REPLIES 3

alidoucette
Apprentice

Update: it will also print borderless 11x17 (which is an available paper size in my page setup settings from Lightroom Classic). Just not 13x19 (not available as a preset size).

jrhoffman75
Legend

Did select Custom size in the printer driver?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

alidoucette
Apprentice

Yep, I was choosing custom size, and inputting 13 x 19. I tried with a .25" margin and also borderless w/o a .25" margin.

Announcements
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!