11-12-2025
10:16 PM
- last edited on
11-18-2025
12:01 PM
by
Danny
I bought this printer second hand. I did some research and my understanding is that you can refill your ink cartridges. I have refilled them but when I put them back in (yes, these are original canon ink cartridges) the light still displays that ink is low. I have looked up every video on how to "reset" the cartridges but nothing has worked. Anybody run into this issue?
11-12-2025
10:55 PM
- last edited on
11-18-2025
12:02 PM
by
Danny
Hello! @cayita03
Canon printers often show "low ink" even after refilling original cartridges because the chip inside doesn’t reset. You can usually bypass this by holding the Stop/Reset button for 5–15 seconds when the warning appears. Some models need a specific reset sequence, and chip resetters are available for certain cartridges. If that doesn’t work, clean the chip contacts and make sure the cartridge is seated properly. You can still print despite the warning, but avoid running on empty to prevent damage.
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.