01-26-2019
09:35 AM
- last edited on
11-08-2022
09:25 AM
by
Danny
Hello,
My Cannon MX922 is printing photos with some black sections turning out pink (see attached photo) I have made sure that all ink cartradges are full (replaced all of them), run a test page and run a nozel test (it was clear). I am using the photo paper that the printer came with. My printer does not have this issue when printing onto normal paper. Please advise what steps I should be taking to try and fix this.
Thank you!
01-31-2019 11:20 AM
HI ajvv1989,
Troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST(excluding holidays).
We look forward to hearing from you.
11-06-2022 06:07 AM
I have exactly the same problem. It changed overnight. did you get a solution?
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.