cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MG2560 uneven borders when printing photos

arc1950
Apprentice

When I print a picture on 6 x 4 photo paper, I consistently get a border that is larger on the right than the other borders. Here's an example:6X4 Print.pngIs this a limitation of the MG2560 printer or is there a workaround?

 

1 ACCEPTED SOLUTION

rs-eos
Elite

The image as shown has a ratio of 10:8 (1.25:1). So your image currently doesn't have the required width to fill the area once the height is filled. As John mentions, you'll want to look at cropping the image to have a 6:4 (1.5:1) ratio instead.

--
Ricky

Camera: EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L
Lighting: Profoto Lights & Modifiers

View solution in original post

3 REPLIES 3

jrhoffman75
Legend
Legend

What software are you printing from?

Is the image cropped to a 4x6 aspect ratio?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I am using Paint.net to print and as you can see from the screenprint below I have resized image to 6X4 inches.

6X4 Print Resise.png

 

rs-eos
Elite

The image as shown has a ratio of 10:8 (1.25:1). So your image currently doesn't have the required width to fill the area once the height is filled. As John mentions, you'll want to look at cropping the image to have a 6:4 (1.5:1) ratio instead.

--
Ricky

Camera: EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L
Lighting: Profoto Lights & Modifiers
Announcements