10-29-2022 05:01 PM - last edited on 11-02-2022 09:26 AM by Danny
My mom had gotten me a printer for collage and everything was going fine until it got to the ink and the instillation of the software for this printer. The black ink cartage light wont go off and I've put it in multiple times and the instillation of the program is stuck at the end. I have done all of what I was told to do and nothing is working. The ink is new, and the software has been downloaded several times and my computer, and printer, restarted. It's a MG2522.
11-02-2022 01:19 PM
I recommend performing a reset of the printer. While the printer is on, unplug the power cord from the printer. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer.
If that does not work, please reply with the information that is on the cartridges( ink number, where the cartridge was made, etc).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.