cancel
Showing results for 
Search instead for 
Did you mean: 

No working buttons on Canoscan 9000F Mark 2

fiboux
Apprentice

Greetings CANON forum,

 

This topic is about the CANOSCAN 9000F Mark2 scanner. I hope the printer category of the forum can be used for that topic.

 

This scanner is great, but I have a small problem: "the buttons located on the scanner are not working properly".

 

These are more details:

 

- All settings have been defined in CANON SCANNER utilities in order to attribute an action to each button

- Each time I press a button, Microsoft Pulisher launches and no other action is undertaken.

 

PC is Windows 7 family edition X64, all drivers (including the canon driver) up-to-date.

 

After Christmas morning analysis, I discovered some interesting things:

 

- Drivers we download from CANON are declared from 1/10/2013 but if we look closer, drivers are from 10/09/2012 V 20.0.0.5. I hope this is normal, I assume that this is the case.

 

- If I open the Windows printer properties, i definitely see (in properties of the SCANNER) that the action attributed to each button is: "Launch Microsoft Publisher", with no possibility to change to something else.

 

So my question is:

 

- It sounds that the actions attributed to buttons have no effect using the CANON tools. Is it a known problem? Is there a workaround so far?

 

Thank you so much!

 

Fiboux

2 REPLIES 2

Julius
Rising Star

Hi fiboux,

 

Please visit the following website, click "Software," and download the "My Image Garden" software.  This should resolve the issue you are having!

 

http://www.usa.canon.com/cusa/consumer/products/scanners/film_negative_scanners/canoscan_9000f_mark_...

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thank you!

 

I had the same issue. After installing "My Image Garden" the buttons are working properly.

Announcements
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM