01-29-2016 11:01 AM
I have a new pixma ip8750. The prints are darker tha what is on my moitor.
I have downloaded new drivers and Image garden to no effect.
Previously I had a HP photo printer which gave good prints but died.
Have tried various driver settinsgs but all prints came out closely the same. Dark.
any ideas ?
Solved! Go to Solution.
02-04-2016 03:53 PM
See this article: http://www.outbackphoto.com/printinginsights/pi049/essay.html
Set your monitor brightness at about 50% level and be sure no light is shining directly on the monitor surface.
02-04-2016 03:53 PM
See this article: http://www.outbackphoto.com/printinginsights/pi049/essay.html
Set your monitor brightness at about 50% level and be sure no light is shining directly on the monitor surface.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.