02-15-2013 01:26 PM
My Pixma MG5220 seems to "process" unendingly with the initial print command each time I use it. May be autocleaning, but it extends time necessary to print, and I suspect it is wasting ink. Can anything be done to shorten the "Processing" cycle or limit the number of times it occurs?
02-25-2013 07:30 PM
Hi excomm,
The PIXMA MG5220 and all of our Canon printers are setup to automatically perform a cleaning when it has been a certain amount of time since the last cleaning was performed. This is done automatically by the printer and is hard wired into the printer system. Unfortunately, this cannot be changed.
I hope this answers your question.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.