cancel
Showing results for 
Search instead for 
Did you mean: 

MG6650 will not remain on and continuously power recycles off

PrinterProblem
Apprentice

I have an MG6650 and until a few days back it worked perfectly. Then it would not stay on. I had followed the reset a number of times but it made no difference. Having read the advice from

MX490 power cycling fix from user on forum SPREAD THE WORD!"

I disconnected my router and the printer worked just as before on local wifi. I reset the DNS address to end on a higher number and I can print as before however printer now is disconnected from the internet.

Having read all the recent posts of similar problems what does it take for a permanent solution to come from the manfacturer?

1 ACCEPTED SOLUTION

ArthurJ
Product Expert
Product Expert

Hi! 

Canon released a firmware update to take care of this issue. Learn more now by clicking HERE.

 Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. 

View solution in original post

2 REPLIES 2

ArthurJ
Product Expert
Product Expert

Hi! 

Canon released a firmware update to take care of this issue. Learn more now by clicking HERE.

 Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. 

PrinterProblem
Apprentice

Printer functions now just as before. Many thanks for the direction

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!