How do I correct odd page upside down while duplex printing?

[RMIGHTY1]

My MX870 prints every other page upside down while printing a catalog in duplex mode.  How can I correct this? The catalog was written using MSWord 2007. Obviously, I can manually duplex the catalog. I am praying there is a solution to be able to automatically duplex.

Thank you.

[Michael]

Hello RMIGHTY1.

When you enable the duplex printing option, please choose the Page Setup tab in the printer settings.  Then change the 'Stapling' setting to the desired 'Short-side'.  This should correct the way the duplex printing is performed.  The default option is Long-side left.

[RMIGHTY1]

Thank you Michael for your response. I have tried that and it did not work. What I did do however is d/l and install the latest driver from the Canon website. Upon installation of the driver, windows7 automatically also installed their driver having a "WS" suffix. That driver did the trick and it is now duplex printing for me just fine. Thank you again for your response.

[montyrosen]

After 3 days of futile efforts to solve odd page upside printing in duplex print. The problem was solved as follows:

Go to the print menu

1. Go to quick setup

select "Preview - Duplex - Paper size - Orientation [make sure document and printer orientation are the same}

2. select "page setup "

on page layout select "normal size print" - "duplex automatic" - "stapling left side"

Print area setup  "select - used reduced printing"       Selection of " use reduced printing" is the key to solving the problem

3.  Problem solved

[CanonAE1]

Thank you a million for your tme and your awesome sharing. After many times of unsuccessful tries of printing all of sudden I met your solution here and it solved the problem perfectly. I appreciate you again for your awesome sharing. All my bests.

[larrymummey]

Solution didn't work for me

[dbrunt]

Thank you montyrosen!

This solved my duplex upside-down-reversed problem on MG7520 in 30 seconds!!

[yorkyeshine]

Please, Please, can someone tell me if there is a setting to beable to change my canon Pixma 5650 from printing my alternate pages upside down.