10-06-2018 06:36 PM
Hello,
Brent Ramsey says "Magnification in x2, x4 and x8".
Why can´t I do that with my C300 II? Do I have a problem in my camera; a bug or some "wrong" chosen preferences?
Firmware is updated (2018).
Thank you very much for any help.
Cheers.
Solved! Go to Solution.
10-08-2018 11:30 AM
10-07-2018 06:38 PM
Hello Cunha,
We're sorry to hear the magnification doesn't seem to work. When this happens, does the word MAGN. appear alongside a circle with a slash through it? If so, that would indicate a setting within the Menu- Assistance Functions> Magnification> Available while recording is set to Off. This would also be where one would check if the magnification function in general was enabled, perhaps it has gotten disabled on your camera.
10-07-2018 07:48 PM
Hello Tim,
thank you for your message.
Magnification works but without variation like Brent says on the video ("Magnification in x2, x4 and x8" steps).
It show just one step, or cancel, in my C300 II.
After viewing Brent´s video I was expecting magnification in steps; but not.
Thanks again.
10-08-2018 11:30 AM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.