03-13-2020 12:43 AM
Hey, I cannot get a signal on my Viltrox DC-7HD monitor from my C300 through the HDMI output. Have tried all ways. I am shooting 25P. The cable and monitor are working fine as that was the first thing I tested. Interestingly when I switch the camera to 59.24Hz it will deliver a picture (but also swtches the rame rate to 29.97P but I cannot shoot on that for delivery. Any solutions?
03-13-2020 12:16 PM
I found zero specifications at Viltrox's web site regarding exactly what signals can be processed. It literally just says HDMI. But HDMI version what? And what exact signals?
Note that brands such as Atomos, or Blackmagicdesign have detailed specs as to all the possible signals that can be used. e.g. 1080p23.98, 1080p24, 1080p25, 1080p29.97, etc.
It's thus possible that the Viltrox unit will only work with a limited set to include 29.97 and 59.94 as you've found.
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.