cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

eos webcam utility stream timelimit

nutbrownharedad
Apprentice

The FAQ states: 

Q: How long can I stream using the EOS Webcam Utility software? Is streaming limited to 30 minutes?

A: The streaming is not limited to 30 minutes and you can stream until the battery runs out. If you want longer usage please consider an AC adapter and DC coupler as an option. Depending on the camera temprature, camera will automatically shutdown to protect camera device. To prevent overheating it is recommended to set the video resolution to 1080p.

 

But when I use the Webcam utility on mac, into to OBS, every so often mins, the video is interrupted, the screen flashes with the webcam utility graphic, and then the video resumes. How can I get rid of that time-out for an uninterrupted stream? Thanks. 

3 REPLIES 3

Mark35mmF2
Product Expert
Product Expert

Hi,

 

What you are describing sounds like a connection interruption rather than something built in. This could be the USB cable or it might be software settings, one good way to check is by using a different program than OBS. If it is the software then the issue would likely not happen in another program and you may want to look into the video settings in OBS. If it is more likely a hardware (USB cable, USB port, camera) issue then you would still see it in another program and there are a few possible solutions.

 

The first thing I would try would be a different USB cable plugged into a different USB port. Especially if you use a long (5+ feet) USB cable this would be a good thing to test because longer cables can be more susceptible to interference, but using a different USB port on the computer will also help us eliminate the original USB port from the equation.

Thanks for your input

thewong1024
Contributor

Ran into the same issue and on this thread, someone finally shared the answer for the 30 min interrupt.

 

https://community.usa.canon.com/t5/Software/EOS-Webcam-Utility-shuts-off-then-on-every-30-minutes/m-...

 

 

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.