01-20-2021 12:19 PM
I have a Canon 7D Mark II and a Macbook running MacOS 10.15.7 running the 1.1 release of the EOS Webcam Utility. I have the camera setup as a webcam and works great except for one new behavior. If I'm in a meeting longer than 30 minutes, it'll shutoff almost exactly at 30 minutes for a couple seconds and then reconnect. It sounds like it is power cycling. In the Setting menu I already adjusted the Auto Power Off to disabled. When I had the beta webcam utility, this wasn't happening. Only really started noticing it after I updated it to 1.1.
Any thoughts on how to fix this?
Solved! Go to Solution.
02-04-2021 01:06 PM
11-22-2022 11:45 AM
But how do you stop the screen displaying that no card is inserted?
Do you guys use video mode or AV, M etc.
02-06-2021 10:24 AM
was this ever resolved? having the same issue...
02-06-2021 12:05 PM
Not yet, going to test the auto power off set a 1 min to see if that works. I did find that if I tap the shoot button it resets the 30 minute timer. Kind of annoying since I have meetings that go over 30 minutes but it's a hack for now. Still looking for a more permanent fix.
02-06-2021 12:13 PM
02-07-2021 11:33 AM
02-08-2021 03:45 PM
Glad to hear that this worked for you too!
02-08-2021 05:20 PM
05-04-2021 08:02 AM
05-04-2021 08:24 AM
11-22-2022 09:26 AM - edited 11-22-2022 09:27 AM
Great question. I don’t have any idea why it worked. I guess I just got lucky.
If I had to venture a guess as to why it worked, then it would be because the default setting is not disabled. One minute might be the default, I’m not sure.
It is a safe bet that the Webcam Utility has to make a number of assumptions about camera settings. The best assumptions to make would be settings are at their factory defaults. The same app seems to be used with a wide variety of cameras, each with their own set of menus and options.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.