cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

my canon xl2 won't power on

Fabian
Apprentice

My canon xl2 would not power on. Can anybody help

1 REPLY 1

Richard
Product Expert
Product Expert

Hi Fabian,

I'm sorry to hear that your XL2 camcorder won't power up.

If your camcorder won't power up with a fully charged battery attached, it will require service to correct this issue.  I regret the difficulty this causes.  Here's how to send your camcorder in for service:

Please ship your camcorder to the Factory Service Center shown below.  When shipping your Canon camcorder, please be sure to remove any accessories.  You are not required to send any accessories or manuals when shipping the camcorder. 

Just fill in (right on your computer) this document, print a copy for your own records (You can't save it with your information) and a copy to send with your camera:

www.usa.canon.com/app/pdf/dealer/FSC.pdf

As we do not provide RMA numbers for service, we suggest using a trackable and insurable service (i.e. UPS, Federal Express, Priority Mail) to ship your camcorder.  Please package the camcorder very securely in a sturdy shipping box to prevent damage during shipment.

Please send your camcorder to the closest of the following addresses:

Canon Factory Service
100 Ridge Rd
Jamesburg, NJ 08831

 

Canon Factory Service
15955 Alton Parkway
Irvine, Ca 92618

 

Canon Factory Service Center
12022 Canon Blvd
Newport News, VA 23606

 

Upon arrival at the Factory Service Center, your Canon camcorder will be logged in to our repair database and assigned a repair number.  This typically takes between 3 and 5 business days. You will be advised of the findings via email.  If the required repairs are covered by the warranty, the repairs will begin immediately, and you will not be contacted. When the repairs are complete, the camcorder will be shipped back to you via Federal Express.  The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed.  Usually, warranted repairs are completed within approximately 7 to 10 business days of the camcorder's arrival at the Factory Service Center.

All decisions regarding warranty coverage are made by the Factory Service Center at the time of repair.  If the repair entails something that is not covered in warranty, a written estimate will be sent to you at the address that you have provided.  The repairs to your camcorder will not begin until you approve this estimate and make payment arrangements.  If, after receiving the estimate, you do not wish to have the camcorder repaired, please inform the Factory Service Center of your decision as soon as possible.  If you decline the estimate, the camcorder will be shipped back to you unrepaired.

Once you have confirmed with your shipper that the camcorder has been delivered, you are more than welcome to contact us for repair updates. Please include your name, address, and telephone number, as well as the serial number of the camcorder, in all repair status inquiries.  If you prefer to check the repair status by phone, please call the Canon Customer Care Center at 1-800-OK-CANON (652-2666).  Agents are available Monday through Friday, from 8 AM to Midnight ET, and on Saturdays from 10 AM to 8 PM ET.  Again, please have the serial number of the camcorder available when you call.

Our U.S. Factory Service Centers are unable to accept packages from or return equipment to addresses outside the United States.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.