09-06-2017 04:48 AM
Hello everybody, I recently purchased the Canon XF205 and had some troubles during a shoot. When I was recording and zoom in to get a nice close up of a plant and hold it for somewhat 5 seconds, the camera slowly zooms out by itself. I though it was my hand pressing the button by accident or zoom ring... but no... One day it is working fine and the other day its doing weird... Is there a setting that I should turn off? Or how can I solve this problem?
Thanks in advance and have a nice day!
09-06-2017 01:18 PM
I don't know whether or not this will help or if it is something you have already done but information on using the Zoom control is located on pages 74-79 of the Instruction Manual.
09-06-2017 04:20 PM
Thank you for your reply VideoGeek! I have tried to reproduce the 'zoom-out' and no luck. I have checked the firmware, played around with the camera, shake a bit and zoom-in zoom-out, turn off network/wifi settings and checked if I really did not touched the zoom buttons/ring by accident I have read the manual and it only explains how to use the zoom. I though there was a special function like a 'interval zoom out' (zoom in for 30 sec and zoom out after 30 sec automatic) but there wasn't.
Forgot to mention that I bought two of these cameras and both have the problem.
09-06-2017 04:50 PM
Hopefully another owner who knows the XF205 will be able to help you. I don't own one so all I can do is research the issue online and speculate as to what might help instead of giving you anything you can use. I hope you find a solution soon.
09-14-2017 06:01 AM
Thanks for trying to help me VideoGeek.
I have contacted the shop where I bought the camera and they said it is a common problem... so I just returned the camera to the shop which goes to the factory.
09-14-2017 10:30 AM
You're welcome. I hope you get it back in great working condidtion and soon.
06-27-2018 08:15 AM
Could it be possible that I can have the name of your dealer. I'm based in the Netherlands and have the same problem 2 camera's.
In Holland they won't do a thing about it because there are not enough issues in the European database. I'm now trying to convince Canon Europe that overseas the problem is common and tCanon USA will take care of it.
Hope you can help.
06-27-2018 10:14 AM
According to Canon it is a worldwide common problem. However, you should contact the shop where you bought them as they are partly responsible. PM for more information.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.