12-15-2013 10:04 AM
I have a Vixia HFM 41a and am not sure how to set controls so that the recordings are going to the memory card .
Where would I find the setting for this, and how would I know if I am on which memory card A or B.?
Thanks for any detailed help I can get.
Moe
12-17-2013 09:41 AM
Hi moe103!
Thanks for posting.
In either the M or CINEMA modes, you can select from recording to the built-in memory or the different memory card slots. Please do the following:
This didn't answer your question? Find more help at Contact Us.
12-17-2013 06:53 PM
Mike :
Thanks for the information. That should be good for me.
I found that the manual wasn't too clear on the instructions.
Thanks for the help.
Moe
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.