07-29-2014 08:38 PM
In Aperture-Priority mode, only the aperture is displayed on the LCD while recording.
In Shutter-Priority mode, only the shutter speed is displayed on the LCD while recording.
Is it possible to display both the aperture and shutter speed on the LCD while recording?
I usually shoot in Aperture-Priority mode with the aperture wide-open for shallow DOF. When outdoors or in bright lighting, this usually results in a very fast shutter speed (1/200 or faster).
I would like to get the shutter speed down to around 1/48. I have a variable-ND filter on the lens, but it's very difficult to set it correctly because the shutter speed is not displayed on the LCD when using Aperture-Priority mode.
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.