06-29-2020 10:24 AM
I am using my backup R800 as a security camera to monitor pets and I had it recording overnight but at a certain point, I could not view footage for at least 3 hours. Could it be the SD card being the issue?
07-01-2020 01:22 AM
Hi there,
The SD card is certainly a possible suspect for this issue. Another thing to check would be the operating temperature. Since you were recording overnight I imagine temperature is less of an issue but if the power supply or imaging sensor in the camera get too hot the unit may power down for the safety of the hardware.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.