01-01-2014 02:45 PM - edited 01-01-2014 03:06 PM
Canon camcorders come with a "ferrite core" to be attached near to the plug that connects the power supply into the camera. The instructions say to attach 7 cms from the plug going into the camera. I'm wondering if this i really necessary or is it to comply with some US or Canadian standard; if it is why didn't Canon install at the factory or use a cord with a ferrite built into the cable. I'm leaning to not bother. Any thoughts?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.