05-25-2019 09:13 PM
Is there a way to disable the Audio Gain on the G40? I am using an external mic but when there is a pause in the audio the noise floor goes thru the roof. I have it on manual, line in.
Solved! Go to Solution.
05-29-2019 04:24 AM - edited 05-29-2019 04:25 AM
On page 81 there is a section on setting the recording level to manual instead of auto gain. Give that a try.
05-26-2019 08:27 AM
Have a look at the audio settings section in the manual. In my Legria G40 manual it starts on page 78.
05-28-2019 01:05 PM
The manual must be about the same. I have the setting on manual (which I thot would disable any AGC function) for a line in external audio source (audio console). But it still raises the noise floor during pauses in the audio.
05-29-2019 04:24 AM - edited 05-29-2019 04:25 AM
On page 81 there is a section on setting the recording level to manual instead of auto gain. Give that a try.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.