topic Re: How to connect - 430EX III - RT with 270EX II ? in Speedlite Flashes

How to connect - 430EX III - RT with 270EX II ?

kenstjohn — Wed, 23 Jan 2019 23:48:41 GMT

I am using a 6D Mk II and need a simple wirelerss flash setup. I'd like to use a 430EX III RT as the on camera master, and a 270EX II in slave mode to highlight just a small portion of the scene. I cannot get the two flases to connect wirelessly.

The 270's manual indicates it will work as a wireless slave unit on channels 1-4, A group only.

I have set the 430 to wireless master mode, tried Ch 1,2,3,4 to no avail ... no connection and the 270 does not flash. Tried all three settings for groups on the 430 ( AUTO, AB and ABC) - no connection and no flash.

Am I missing something or is this setup just impossible?

Thanks in advance.

Ken

Re: How to connect - 430EX III - RT with 270EX II ?

MikeSowsun — Thu, 24 Jan 2019 05:09:02 GMT

Sorry, the 430EX III-RT and 270EX II are not compatible in wireless operations.

The 430EX III-RT has both radio wireless capability and optical wireless capability as a "Slave Flash", but only radio wireless capability as a "Master Flash".

The 270EX II has only optical wireless capability as a "Slave Flash", just as the 430EX II in the chart shown in the manual.

Re: How to connect - 430EX III - RT with 270EX II ?

kenstjohn — Fri, 25 Jan 2019 17:54:53 GMT

The manual for my 270EX II specifically states that it can be used as a wireless slave unit.

Thus my confusion ...

Ken

Re: How to connect - 430EX III - RT with 270EX II ?

MikeSowsun — Fri, 25 Jan 2019 18:47:50 GMT

Yes, but OPTICAL wireless slave only. Not RADIO (RT) wireless slave.

Re: How to connect - 430EX III - RT with 270EX II ?

kenstjohn — Fri, 25 Jan 2019 18:50:02 GMT

But on the next page, it indicates the radio channels (1-4) are used.

Ken

Re: How to connect - 430EX III - RT with 270EX II ?

MikeSowsun — Fri, 25 Jan 2019 19:10:55 GMT

Those are optical channels not radio channels.

Page 25 of the manual has the specs.