https://community.usa.canon.com/t5/Scanners/imageFORMULA-DR-M260-Windows-11-Error-Code-36/m-p/532755#M3106 <P>I have a DR-M260 scanner that will sometimes give me an error message on Windows 11 that reads. Can't talk to scanner, check cables and power.[Error Code=36]</P> <P>&nbsp;</P> <P>If I restart the scanner itself, and it will come back and start communicating. I have contacted my IT department, and they have removed and re-installed the software for the scanner and have checked all power settings on the USB plugs, as well as tried replacing the USB cable. I have had it happen twice in the past 30 minutes.&nbsp;</P> Wed, 05 Feb 2025 21:01:26 GMT rwhicker 2025-02-05T21:01:26Z https://community.usa.canon.com/t5/Scanners/imageFORMULA-DR-M260-Windows-11-Error-Code-36/m-p/532755#M3106 <P>I have a DR-M260 scanner that will sometimes give me an error message on Windows 11 that reads. Can't talk to scanner, check cables and power.[Error Code=36]</P> <P>&nbsp;</P> <P>If I restart the scanner itself, and it will come back and start communicating. I have contacted my IT department, and they have removed and re-installed the software for the scanner and have checked all power settings on the USB plugs, as well as tried replacing the USB cable. I have had it happen twice in the past 30 minutes.&nbsp;</P> Wed, 05 Feb 2025 21:01:26 GMT https://community.usa.canon.com/t5/Scanners/imageFORMULA-DR-M260-Windows-11-Error-Code-36/m-p/532755#M3106 rwhicker 2025-02-05T21:01:26Z