topic Re: cyan not printing pro100 in Professional Photo Printers

cyan not printing pro100

rubiera — Sat, 09 Nov 2019 17:40:07 GMT

Hello, I'm having an issue with my Pixma Pro 100 printing the color cyan. I've tried deep cleaning, bottom plate cleaning and physically unclogging the printer heads to no use. When I do a print test, the Cyan color will show up, but only very faintly and very streaky. Could someone please help with this issue? Thank you!

Some else had the exact same problem than me

I just copied his post since the probles are identical.

Re: cyan not printing pro100

shadowsports — Sun, 10 Nov 2019 13:43:33 GMT

Greetings,

The chance of your issues being identical to someone elses problem is unlikely.

You might have the same printer and same behavior, but it is certain your environment is different.

Different Computer

Network

Operating System

Conditions under which the printer is being used

Where to start. When did it last work? What has changed?

The most common cause of an issue like this is lack of use. Inks dry up, print head becomes clogged, etc. Next would be a problem with the print head itself

Pigment based inks are less forgiving and have a shorter shelf life. Exposure to air and heat can also contribute to this.

A new ink cartridge and several deep cleanings might help. I know, its an expensive undertaking. The fact that cyan is printing faintly soulds like a problem with ink delivery.

If the above doesn't help or resolve and you've inspected things, I would contact Canon Support.

Re: cyan not printing pro100

rubiera — Sun, 10 Nov 2019 21:19:20 GMT

I have tried every trick on the web. including forcing ink with a syringe and it comes out the appropiate head. but it has gotten worse for the last 8 month now it prints no color at all on the cyan bar.

Re: cyan not printing pro100

Patrick — Fri, 15 Nov 2019 18:47:12 GMT

Hi rubiera,

It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:

http://Canon.us/ContactLI

Re: cyan not printing pro100

patmeierjohnson — Sun, 26 Jul 2020 01:12:25 GMT

Canon wants me to buy a new printer. I cannot accept this as a solution. Everything prints well except for Cyan. It is totally absent from the nozzle check. I have done a nozzle alignment. I have cleaned the ink tray. The blue-violet in my art prints is coming out red-violet. I cannot see why I should add my printer to the garbage heap. Why can this not be fixed??????

Re: cyan not printing pro100

jrhoffman75 — Sun, 26 Jul 2020 20:49:53 GMT

1. Were you dealing with an official Canon support site? There are sites that claim to be Canon support but are really third party sites.

2. You didn't say if you ran a nozzle check or a head cleaning. The actions you described won't address a color not printing problem.

Re: cyan not printing pro100

patmeierjohnson — Sun, 26 Jul 2020 22:43:35 GMT

Hi JR,

Yes, I spoke with Vince in support at Canon. Really nice guy.

Yes, many nozzle checks and headcleanings. Took out all the inks, replaced them. Did a nozzle check with Group 2 and consistently the Cyan doesn't show and the Light Gray comes and goes. The alignment shows cyan.

Wah!

Pat

Re: cyan not printing pro100

patmeierjohnson — Sun, 26 Jul 2020 22:48:38 GMT

Some of my final art prints are fine but the printer is printing redviolet where it should be blueviolet. Makes a big difference in my mountain paintings.

Re: cyan not printing pro100

adahl7796 — Sun, 08 Nov 2020 00:03:41 GMT

Did you ever find a solution? I’m having the same problem.