topic Pro 10s - flashing red lights against 2 new cartridges in Professional Photo Printers https://community.usa.canon.com/t5/Professional-Photo-Printers/Pro-10s-flashing-red-lights-against-2-new-cartridges/m-p/276615#M7462 <P>Hi I hope you can help.</P><P>&nbsp;</P><P>Today I printed a print and noticed that the colours were way off, this is the first time Ive used the printer since recently replacing two ink cartridges, cyan and magenta. And have never had issues with prints matching the screen before.</P><P>&nbsp;</P><P>On inspection against the two cartridges I replaced there is a flashing red light approx 1 flash every 2 seconds, a warning that the ink leels are low. However the printer utility says that the levels are full.</P><P>&nbsp;</P><P>Any ideas how to fix this?</P><P>&nbsp;</P><P>&nbsp;</P> Tue, 02 Jul 2019 16:06:27 GMT sunnymed 2019-07-02T16:06:27Z Pro 10s - flashing red lights against 2 new cartridges https://community.usa.canon.com/t5/Professional-Photo-Printers/Pro-10s-flashing-red-lights-against-2-new-cartridges/m-p/276615#M7462 <P>Hi I hope you can help.</P><P>&nbsp;</P><P>Today I printed a print and noticed that the colours were way off, this is the first time Ive used the printer since recently replacing two ink cartridges, cyan and magenta. And have never had issues with prints matching the screen before.</P><P>&nbsp;</P><P>On inspection against the two cartridges I replaced there is a flashing red light approx 1 flash every 2 seconds, a warning that the ink leels are low. However the printer utility says that the levels are full.</P><P>&nbsp;</P><P>Any ideas how to fix this?</P><P>&nbsp;</P><P>&nbsp;</P> Tue, 02 Jul 2019 16:06:27 GMT https://community.usa.canon.com/t5/Professional-Photo-Printers/Pro-10s-flashing-red-lights-against-2-new-cartridges/m-p/276615#M7462 sunnymed 2019-07-02T16:06:27Z Re: Pro 10s - flashing red lights against 2 new cartridges https://community.usa.canon.com/t5/Professional-Photo-Printers/Pro-10s-flashing-red-lights-against-2-new-cartridges/m-p/276660#M7463 <P>Verify that all the packaging wrapper has been removed. Double check top vent hole is not covered with wrapper. Remove and reseat cartridges.</P> Tue, 02 Jul 2019 23:36:51 GMT https://community.usa.canon.com/t5/Professional-Photo-Printers/Pro-10s-flashing-red-lights-against-2-new-cartridges/m-p/276660#M7463 jrhoffman75 2019-07-02T23:36:51Z