topic Re: Hahnemuhle papers and calibration in Professional Photo Printers

Hahnemuhle papers and calibration

elroustom — Tue, 12 Mar 2019 13:00:39 GMT

I've been pulling my hair out. I have Spyder screen and print calibration - I've gone through all the steps dozens of times.

I've printed targets, I've read targets, I've used every Media Setting in combinations.

I can get almost spot on color with color photos.

The Heavy Weight Fine Art settings (based on a target made that way) is a bit washed out.

The Matte Photo Paper is over saturated, or tinted on way or the other.

I make adjustments to the profile, and I can get by.

Then I go to print a grayscale image using these profiles and instead of a neutral image I get pink or magenta.

All this is through Canon Print Studio Pro working withing Photoshop 2019.

I'm about to give up and build a darkroom.

Any similar experiences, or hints?

Re: Hahnemuhle papers and calibration

jrhoffman75 — Tue, 12 Mar 2019 19:00:04 GMT

Have you tried using the profiles supplied by Hahnemuehle? I use their profiles with several of their papers with good results.

Re: Hahnemuhle papers and calibration

elroustom — Tue, 12 Mar 2019 19:06:00 GMT

I have, which is why I began the masochistic investment in calibration.

What are you using for Media settings?

Moab Endura profiles give Moab Endura better results than I’ve had with Hahnemühle profiles and paper. But all too dense.

Re: Hahnemuhle papers and calibration

elroustom — Tue, 12 Mar 2019 19:06:38 GMT

And thanks for reply.

Re: Hahnemuhle papers and calibration

jrhoffman75 — Tue, 12 Mar 2019 19:18:10 GMT

What Hahn papers are you using, and what printer?

Re: Hahnemuhle papers and calibration

elroustom — Tue, 12 Mar 2019 19:27:06 GMT

Hahnemüle photo rag Duo, andvthe 308gsm

I’ve used them mostly with Heavy Weight Fine Art. Dramatically different but sharper results with Matte Photo Paper.

Re: Hahnemuhle papers and calibration

jrhoffman75 — Tue, 12 Mar 2019 19:49:40 GMT

I don"t use those papers, so I can't report my experience.

Re: Hahnemuhle papers and calibration

indigoimagelab — Wed, 13 Mar 2019 03:21:27 GMT

I use the Hahnemuhle Photo Rag on my Imageprograf PRO-4000 with great results. Try setting the printer driver to "Highest Density Fine Art Paper." I got that from this document:

https://support.usa.canon.com/kb/index?page=content&id=ART163327

There's also this document:

https://ugp01.c-ij.com/ij/webmanual/Manual/All/PRO-4000/EN/PIF/pif_4000f_0000_2ra_eng.html

It also shows settings for Photo Rag. I print straight from Photoshop or Illustrator; I don't use Print Studio Pro. Be sure you're setting the right paper profile under "Color Management" in the Photoshop dialog box, and then the same paper type when you go into Print Settings and enter the paper type in Canon's print driver. If both papers don't match, you won't get good results. Let me know how it goes.

Neil Goldman

Indigo Image Lab, Inc.

Re: Hahnemuhle papers and calibration

elroustom — Wed, 13 Mar 2019 03:47:46 GMT

Thanks Neil,

That's encouraging.

I will look at all those options.

I may be having a hardware problem.

I keep having to clean the Yellow head, it keeps getting clogged.

I wonder if I'm getting strange colors ...

But I'm really trying to figure this out, and I'll update the post.

Elias

Re: Hahnemuhle papers and calibration

elroustom — Wed, 13 Mar 2019 13:15:09 GMT

Now I'm finding that the Canon Pro-1000 won't take files from PS. It will only go through Print Studio.

I happened to find another post of yours Niel where you were having similar trouble printig from PS.

I'm going to uninstall the printer, reload the driver, and try again.

What an expensive machine to get on-line!

Re: Hahnemuhle papers and calibration

RSPhoto51 — Wed, 20 Mar 2019 18:21:57 GMT

I use Moab or Canson and have no troubles like you mention. I always print with the correct ICC profile and it seems to work.

Re: Hahnemuhle papers and calibration

elroustom — Wed, 20 Mar 2019 20:06:52 GMT

I need the time to get in touch with Canon - they don’t do weekends ... seems the real problem is that my printhead is dying.