topic Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem in Professional Photo Printers

pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

andyw — Fri, 07 Aug 2015 18:25:17 GMT

Pro 9500 mark 2

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

jrhoffman75 — Sat, 08 Aug 2015 10:50:18 GMT

Are you sure it is in fully up or fully lowered position? I don't mean pivoted open or closed, but raised or lowereed for front or normal feed.

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

andyw — Sat, 08 Aug 2015 14:37:09 GMT

The flap is in its normal resting ( lowered) position so is flush with the rest of the surrounding printer body. In order to use the front feed you would have to raise the flap upwards until it clicks into an horizontal position.

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

jrhoffman75 — Sat, 08 Aug 2015 15:30:38 GMT

I'm not understanding the problem. Sorry I can't help.

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

andyw — Sat, 08 Aug 2015 18:47:38 GMT

Thanks for your input. Sorry but I am not explaining this clearly. The following pictures will show you what has happened. Since your last post we have been 'fiddling ' with the flap and have managed to get it down to the horizontal. There is plainly something wrong with the mechanism as normally it is smooth and quiet whereas as now it needs a bit of persuading which causes some creaking of plastic against plastic!

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

jrhoffman75 — Sat, 08 Aug 2015 19:36:45 GMT

Try unplugging printer from the walk and wait 30 seconds. Plug back in and push ON button. That may reset the mechanism.

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

andyw — Sat, 08 Aug 2015 20:31:56 GMT

Have tried unplugging and waiting for 30 seconds but no difference. I think the problem must be mechanical and perhaps some part of the opening mechanism has been dislodged or broken. However all is not lost - the printer is still operable and functions much the same as before. Thanks for your help. I see you live in a very pleasant part of NH. We were there a couple of years ago and if I remember rightly had the best breakfast ever in the states!

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

jrhoffman75 — Sat, 08 Aug 2015 21:36:10 GMT

Glad you are operable. As long as you don't want 13x19 printer should serve you well.

If you were close to the Conway area maybe you had breakfast at Peaches? It has napkins under glass that people rite things on.

Re: pro 9500 Mk 2 front flap will not lower fully. Any ideas how to rectify the problem

andyw — Sun, 09 Aug 2015 09:07:26 GMT

That's the one. Thanks