Canon Pixma Pro-200S cuts off part of my print

bondphoto — Tue, 30 Dec 2025 22:21:04 GMT

When I print in A3+ borderless on my # it always cuts off around 2 - 5mm of whatever is on my computer. No matter what adjustments I make to the positioning of the design in the print dialogue box, it's always cut it off. I've even tried resizing the print preview and moving the centering bit by bit to get my design pixel perfect to the edges of the print preview page, and yet it still gets cut off.

I've tried adjusting the crop, the canvas size, image size, and ppi to every possible measurement I can find for my paper size. The paper says 13x19, I try that and it cuts it off. It also says 33cmx48cm, which comes to 12.992inx18.898 inches, I try printing with the image size set to both of those measurements and it cuts off. I've tried it in millimeters to get it as exact as possible and it still continues to cut off on all sides.

I am on Mac OS Ventura Version 13.6, working on and printing from Photoshop 2025.

Re: Canon Pixma Pro-200S cuts off part of my print

Patrick — Fri, 02 Jan 2026 20:01:55 GMT

Hi bondphoto,

When performing borderless printing, the image is enlarged and will extend off of the paper. Any items near the edges of the image may be cut off when printed.

More information regarding borderless printing can be viewed in the manual here:

PRO-200S > Printing from Your Computer (macOS) > Various Printing Methods > Perform Borderless Printing

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

topic Canon Pixma Pro-200S cuts off part of my print in Professional Photo Printers

Canon Pixma Pro-200S cuts off part of my print

Re: Canon Pixma Pro-200S cuts off part of my print