Canon Pro-200 paper feed issue - paper mangled and print has streaks

photo_phan — Tue, 09 Jul 2024 18:06:48 GMT

Hello,

My Canon Pro 200 is just a few months old. I am trying to print at 8.5 x 11' using the top feed, Red River Paper Palo Duro Softgloss Rag paper, the instructions for which say to use the Photo Paper Plus Semi Gloss setting.

I have made numerous prints with this size and type paper on this same printer, and have never had this issue before. I have reproduced the issue several times.

95% of the print comes out looking beautiful, but near the end of the printing process, the paper seems to skew a bit and is actually mangled by the printer, as highlighted in yellow in the first photo below. There is also a streak in the print, highlighted in red, and the skewing of the paper also results in a white unprinted area at bottom right - highlighted in blue.

The second photo simply shows a black smudge on the back of the paper.

The issue does not happen when I print on plain paper.

Any suggestions or recommendations would be greatly appreciated.

Thank you,

Jon

Re: Canon Pro-200 paper feed issue - paper mangled and print has streaks

Patrick — Wed, 09 Apr 2025 18:36:16 GMT

Hi photo_phan,

Please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below to log into your My Canon account:

https://mycanon.usa.canon.com

Once logged in, click on your PIXMA PRO-200 and then click on the Product Support button. When that page loads, click on either the Phone Support button or the Chat Support button to access support. A Technical Support Representative can determine the cause of the banding issue and resolve it or provide you with your available service options.

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

topic Canon Pro-200 paper feed issue - paper mangled and print has streaks in Professional Photo Printers

Canon Pro-200 paper feed issue - paper mangled and print has streaks

Re: Canon Pro-200 paper feed issue - paper mangled and print has streaks