topic Re: Pro-1000 - Black Smudge on Leading Edge of Media in Professional Photo Printers

Pro-1000 - Black Smudge on Leading Edge of Media

hexclimber — Thu, 24 Dec 2020 22:21:14 GMT

I'm geting a bit of black ink on the leading edge of my prints out of my pro-1000. I ran a cleaning cycle, but that didn't resolve the issue. Anyone know what might be causing this and how to fix it?

Re: Pro-1000 - Black Smudge on Leading Edge of Media

jrhoffman75 — Fri, 25 Dec 2020 00:40:59 GMT

Does your printer have a roller cleaning or bottom plate cleaning option in the driver?

Typically, when folks say they ran a cleaning cycle they are talking about running a prin head cleaning for plugged nozzle correction.

Re: Pro-1000 - Black Smudge on Leading Edge of Media

hexclimber — Fri, 25 Dec 2020 02:15:20 GMT

If it does, I didn't see it in my utilities..

Re: Pro-1000 - Black Smudge on Leading Edge of Media

jrhoffman75 — Fri, 25 Dec 2020 10:57:41 GMT

Canon : imagePROGRAF Manuals : PRO-1000 series : Cleaning the Paper Feed Roller

Canon : imagePROGRAF Manuals : PRO-1000 series : Cleaning the Inside of the Printer (Bottom Plate Cleaning)

Re: Pro-1000 - Black Smudge on Leading Edge of Media

hexclimber — Fri, 25 Dec 2020 16:50:54 GMT

Thanks John...!

Re: Pro-1000 - Black Smudge on Leading Edge of Media

JohnKentHill — Thu, 04 Feb 2021 21:35:44 GMT

I have the same problem especially on the leading edge. It seems to have more to do with the paper thickness as it makes a racket as the leading edge begins to print. I've set the printer properties to FineArt Heavy Weight paper and I'm using the manual feed as is required but it doesn't seem to make a difference. I ran the roller clean but that had no effect. Any other suggestions for printing heavy weight papers?

I'm using Lightroom and ICC profiles specific to paper and printer.

Re: Pro-1000 - Black Smudge on Leading Edge of Media

JohnKentHill — Thu, 04 Feb 2021 22:37:00 GMT

I took some time and by hand bowed the paper in the opposite direction of how it naturally bows. This all but corrected the problem. Still, it would be nice if somehow the printer could compensate for the way print papers have a slight bow to them.