https://community.usa.canon.com/t5/Professional-Video/CR-N500-Settings-change-after-reboot/m-p/445184#M3552 <P>On CR-N500 PTZ cameras with firmware 1.3, why do some settings change after a reboot? For example, white balance defaults to AWB and shooting mode defaults to F.Auto. I usually put the cameras in a stand by mode (which saves these settings) but occasionally a unit needs to be rebooted and then I have to go reset these settings. One solution is to have the camera settings saved in a preset but I don't want presets to save that information, I just want PTZF functions saved with a preset.</P><P>Tim</P> Thu, 09 Nov 2023 18:52:49 GMT televisiontim 2023-11-09T18:52:49Z https://community.usa.canon.com/t5/Professional-Video/CR-N500-Settings-change-after-reboot/m-p/445184#M3552 <P>On CR-N500 PTZ cameras with firmware 1.3, why do some settings change after a reboot? For example, white balance defaults to AWB and shooting mode defaults to F.Auto. I usually put the cameras in a stand by mode (which saves these settings) but occasionally a unit needs to be rebooted and then I have to go reset these settings. One solution is to have the camera settings saved in a preset but I don't want presets to save that information, I just want PTZF functions saved with a preset.</P><P>Tim</P> Thu, 09 Nov 2023 18:52:49 GMT https://community.usa.canon.com/t5/Professional-Video/CR-N500-Settings-change-after-reboot/m-p/445184#M3552 televisiontim 2023-11-09T18:52:49Z https://community.usa.canon.com/t5/Professional-Video/CR-N500-Settings-change-after-reboot/m-p/451926#M3673 <P>UPDATE: This issue appears to be resolved in firmware version 1.4, thanks for the fix!</P> Tue, 19 Dec 2023 21:10:01 GMT https://community.usa.canon.com/t5/Professional-Video/CR-N500-Settings-change-after-reboot/m-p/451926#M3673 televisiontim 2023-12-19T21:10:01Z