imagePROGRAF TM-300 is throwing an error during its power up cycle. EC06-2F9C (4801)

MHi — Mon, 28 Jul 2025 20:40:41 GMT

Printer was working a few months ago but has been off during summer break. Now during power up, the print head moves several inches out from the right edge, and then back again, and an error is immediately displayed on the screen EC06-2F9C (4801).

Re: imagePROGRAF TM-300 is throwing an error during its power up cycle. EC06-2F9C (4801)

Sonya1 — Fri, 26 Sep 2025 15:03:13 GMT

Hi MHi,

Try turning the printer off and unplugging the power cord for 10 minutes. While the power cord is unplugged, if paper is loaded, remove the paper from inside the printer. If EC06-2F9C is still displayed, the printer will require service. If you would like help with your service options, contact our Large Format Printer telephone support at 1-800-423-2366 (press option 1 then option 3 for Large Format Printers), Monday through Friday from 8:00 AM to 6:00 PM EST, excluding holidays. I hope this is helpful.

topic imagePROGRAF TM-300 is throwing an error during its power up cycle. EC06-2F9C (4801) in Production Printing

imagePROGRAF TM-300 is throwing an error during its power up cycle. EC06-2F9C (4801)

Re: imagePROGRAF TM-300 is throwing an error during its power up cycle. EC06-2F9C (4801)