https://community.usa.canon.com/t5/Production-Printing/imagePROGRAF-TA-30-EC31-2F1C-Error/m-p/516932#M2178 <P>Our imagePROGRAF TA-30 from a few years ago has started sporadically displaying an "EC31-2F1C" hardware error.&nbsp; I've done some basic troubleshooting to rule out obstructions or other obvious causes, and powering it off/running the various cleaning processes generally resolves it.&nbsp; Well, makes the message go away, anyway.</P><P>This error appears to be related to the purge unit.&nbsp; I've come across posts where replacing the unit did the trick while others continued to receive the error.&nbsp; Just curious if there's a consensus on a solution and if anyone has had experience replacing that part (or a ballpark figure on how much it cost for someone else to do).</P><P>Thanks!</P> Fri, 06 Dec 2024 18:32:05 GMT stuckinaloop 2024-12-06T18:32:05Z https://community.usa.canon.com/t5/Production-Printing/imagePROGRAF-TA-30-EC31-2F1C-Error/m-p/516932#M2178 <P>Our imagePROGRAF TA-30 from a few years ago has started sporadically displaying an "EC31-2F1C" hardware error.&nbsp; I've done some basic troubleshooting to rule out obstructions or other obvious causes, and powering it off/running the various cleaning processes generally resolves it.&nbsp; Well, makes the message go away, anyway.</P><P>This error appears to be related to the purge unit.&nbsp; I've come across posts where replacing the unit did the trick while others continued to receive the error.&nbsp; Just curious if there's a consensus on a solution and if anyone has had experience replacing that part (or a ballpark figure on how much it cost for someone else to do).</P><P>Thanks!</P> Fri, 06 Dec 2024 18:32:05 GMT https://community.usa.canon.com/t5/Production-Printing/imagePROGRAF-TA-30-EC31-2F1C-Error/m-p/516932#M2178 stuckinaloop 2024-12-06T18:32:05Z