https://community.usa.canon.com/t5/Printer-Software-Networking/I-cant-find-the-numbers-on-the-keypad-of-my-pixma-mx922-Trying/m-p/143436#M8800 <P>This might help<BR /><BR />Press the SETUP button on your printer's control panel.<BR />Using the arrows, select DEVICE SETTINGS, press OK.<BR />Select LAN SETTINGS and press OK.<BR />Select Wireless LAN Setup and press OK.<BR />If a message appears to press the WPS button, press STOP to cancel.<BR />Select STANDARD SETUP from the next screen that appears and press OK.<BR />Highlight your access point or router and press OK.<BR />Press OK again to confirm the access point name.<BR />Enter your passphrase using the keypad to the right.<BR />At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.<BR />Press OK when done.<BR />The LCD screen will say "Connected" if the password is correct.</P> Sat, 13 Jun 2015 11:20:02 GMT jrhoffman75 2015-06-13T11:20:02Z https://community.usa.canon.com/t5/Printer-Software-Networking/I-cant-find-the-numbers-on-the-keypad-of-my-pixma-mx922-Trying/m-p/143408#M8799 <P>All that comes up are letters and my code is numbers.&nbsp; How do you get it to show numbers.</P> Fri, 12 Jun 2015 17:41:18 GMT https://community.usa.canon.com/t5/Printer-Software-Networking/I-cant-find-the-numbers-on-the-keypad-of-my-pixma-mx922-Trying/m-p/143408#M8799 kfit103710 2015-06-12T17:41:18Z https://community.usa.canon.com/t5/Printer-Software-Networking/I-cant-find-the-numbers-on-the-keypad-of-my-pixma-mx922-Trying/m-p/143436#M8800 <P>This might help<BR /><BR />Press the SETUP button on your printer's control panel.<BR />Using the arrows, select DEVICE SETTINGS, press OK.<BR />Select LAN SETTINGS and press OK.<BR />Select Wireless LAN Setup and press OK.<BR />If a message appears to press the WPS button, press STOP to cancel.<BR />Select STANDARD SETUP from the next screen that appears and press OK.<BR />Highlight your access point or router and press OK.<BR />Press OK again to confirm the access point name.<BR />Enter your passphrase using the keypad to the right.<BR />At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.<BR />Press OK when done.<BR />The LCD screen will say "Connected" if the password is correct.</P> Sat, 13 Jun 2015 11:20:02 GMT https://community.usa.canon.com/t5/Printer-Software-Networking/I-cant-find-the-numbers-on-the-keypad-of-my-pixma-mx922-Trying/m-p/143436#M8800 jrhoffman75 2015-06-13T11:20:02Z