Need help with printing from my iPad

Jennyhawk75 — Wed, 05 Mar 2014 15:42:13 GMT

Hi
I have canon mg3150 on box it saids AirPrint so can print from my iPad so why got this one.
I understand the first part using hold down maintenance button,then the fit page button,but what and where is the WPS button as not got clue where it is on the printer help please

Re: Need help with printing from my iPad

jrhoffman75 — Fri, 07 Mar 2014 13:27:19 GMT

This might help

Press the SETUP button on your printer's control panel.
Using the arrows, select DEVICE SETTINGS, press OK.
Select LAN SETTINGS and press OK.
Select Wireless LAN Setup and press OK.
If a message appears to press the WPS button, press STOP to cancel.
Select STANDARD SETUP from the next screen that appears and press OK.
Highlight your access point or router and press OK.
Press OK again to confirm the access point name.
Enter your passphrase using the keypad to the right.
At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
Press OK when done.
The LCD screen will say "Connected" if the password is correct.

topic Need help with printing from my iPad in Printer Software & Networking

Need help with printing from my iPad

Re: Need help with printing from my iPad