I switched my wireless network and now my MG3100 will not print wirelessly

krissyswan — Thu, 16 Jan 2014 02:14:11 GMT

I recently switched my modem and my wireless internet network got switched. My printer is no longer working wirelessly, and I can not find the DVD or any of the papers it came with to do the setup. Can I still use this printer? I am operating on Windows 8.

Re: I switched my wireless network and now my MG3100 will not print wirelessly

jrhoffman75 — Thu, 16 Jan 2014 19:58:16 GMT

This might help

Press the SETUP button on your printer's control panel.
Using the arrows, select DEVICE SETTINGS, press OK.
Select LAN SETTINGS and press OK.
Select Wireless LAN Setup and press OK.
If a message appears to press the WPS button, press STOP to cancel.
Select STANDARD SETUP from the next screen that appears and press OK.
Highlight your access point or router and press OK.
Press OK again to confirm the access point name.
Enter your passphrase using the keypad to the right.
At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
Press OK when done.
The LCD screen will say "Connected" if the password is correct.

topic I switched my wireless network and now my MG3100 will not print wirelessly in Printer Software & Networking

I switched my wireless network and now my MG3100 will not print wirelessly

Re: I switched my wireless network and now my MG3100 will not print wirelessly