topic Re: MG3620 Won't connect to new WIFI network in Printer Software & Networking

Software won't detect new PIXMA MG3620

ComicIrishDude — Tue, 18 Feb 2020 20:50:12 GMT

I just bought a brand new PIXMA MG3620 and I am pretty good with computers and software but for some reason, the software will not detect my new printer.

WHAT I HAVE TRIED:
1) ADD NEW PRINTER VIA MY LAPTOP CONTROL PANEL.

2) TRIED 5 TIMES TO INSTALL WITH THE SOFTWARE.

3) HELD THE WIFI KEY UNTIL THE ALARM LIGHT BLINKED 21 TIMES

4) AND JUAT ABOUT EVERY SOLUTION I HAVE READ ON THESE FORUMS

RELATING TO THIS ERROR.

MY QUESTION IS WHY THIS IS STILL AN ISSUE IN 2020, AND WHAT CAN I DO?

PLEASE HELP

THANK YOU

Re: MG3620 Won't connect to new WIFI network

Darius — Tue, 18 Feb 2020 20:45:28 GMT

Hi ComicIrishDude.

If you've already tried the cableless setup and were unable to detect or connect the printer, you may need to add exceptions to your computer's firewall or antivirus. Refer to the security software's directions for adding exceptions.

If your router has a WPS button, or digital interface equivalent, you may use it for the printer's WPS push-button connection. If the printer connects to the router successfully, but still isn't detected by the computer, ensure the computer is connected to the same (2.4 GHz) wireless network.

If the computer is using 5G, then your router may be keeping it and the printer apart to maintain the faster 5G speeds. If the computer is using a VPN (Virtual Private Network), you will need to either connect the printer by USB, or disconnect from the VPN to setup, install, and use the MG3620.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Re: MG3620 Won't connect to new WIFI network

ComicIrishDude — Tue, 18 Feb 2020 23:22:42 GMT

Why is the option to Direct Connect not available?
(See Picture)

I have read the instructions but they are for Windows XP

I am so frustrated right now.

Re: Software won't detect new PIXMA MG3620

Dayday913 — Wed, 19 Feb 2020 01:32:52 GMT

I had trouble connecting earlier as well. It would complete thru step 2 then the alarm light comes on and the installation download gets booted out. Like Darius mentioned I connected to 2.4 GHz WiFi connection on my phone and laptop and restarted the process and success.

Re: Software won't detect new PIXMA MG3620

ComicIrishDude — Wed, 19 Feb 2020 02:10:47 GMT

How do you switch to a 2.4 GHz WiFi connection on Laptop?

Re: Software won't detect new PIXMA MG3620

Patrick — Wed, 19 Feb 2020 20:56:10 GMT

Hi ComicIrishDude,

What version of Windows is installed on your computer?

If you are using a Mac, what version of OSX is installed?

Re: Software won't detect new PIXMA MG3620

Dayday913 — Wed, 19 Feb 2020 21:49:19 GMT

I have spectrum which offers both 2 and 5 GHz WiFi connection. I was on the 5 when I first tried installing it so I connected to the 2 GHz instead and it worked when I ran thru the installation steps again

Re: Software won't detect new PIXMA MG3620

Patrick — Fri, 21 Feb 2020 17:10:34 GMT

Hi Dayday913,

The PIXMA MG3620 can only connect to the 2.4GHz network. I'm glad that you were able to resolve the issue.