topic Re: PIXMA MG3620 - Need to reconnect to new network in Printer Software & Networking

PIXMA MG3620 - Need to reconnect to new network

Magus — Mon, 20 Jan 2020 23:18:16 GMT

Hi there

Printer/Scanner was working fine. Needed to change network name and password due to hack. Unable to get printer reconnected to new network. Presently have a cable between PC and printer, but printer doesn't seem to want to be recognized by software.

I'm thinking perhaps I just need to perform a factory reset and start over, but haven't yet discovered how.

Re: PIXMA MG3620 - Need to reconnect to new network

Magus — Mon, 20 Jan 2020 23:30:22 GMT

Okay, found something suggesting to press and hold the Stop button until alarm has flashed 21 times. But still can't seem to get setup to go

Re: PIXMA MG3620 - Need to reconnect to new network

Darius — Thu, 23 Jan 2020 20:26:39 GMT

Hi Magus.

If you are using Windows, directions for the WiFi setup using USB may be found at the following article:

https://support.usa.canon.com/kb/index?page=content&id=ART169086

In Mac OS, you may do this by opening the Canon IJ Network Tool (Applications \ Canon Utilities \ IJ Network Tool), and click on the drop-down in the top-left corner of the window, selecting Setup.

If you are using Android or iOS, you have the option of the Cableless Setup:

https://support.usa.canon.com/kb/index?page=content&id=ART162917

If your access point (/ wifi router / wifi modem) features a working WPS button, you may try the WPS Push-button setup:

https://support.usa.canon.com/kb/index?page=content&id=ART164109

If you need immediate assistance with this issue, please contact us using the numbers and information at http://Canon.us/ContactLI

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.