topic Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen in Printer Software & Networking

PIXMA MX490 - Router Overlap screen instead of Passphrase screen

dnolan — Mon, 17 Feb 2025 16:07:59 GMT

I'm trying to setup the wireless connection to the wifi in my office, but after I select the wifi network to connect to, I get a Router Overlap screen instead of the Passphrase screen. From there my options are to select one or multiple routers. No matter which option I choose or which routers I choose, the connection fails.

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

Michael — Thu, 31 May 2018 16:49:09 GMT

Hello.

We are not familiar with the message that you described.

Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.

This didn't answer your question or issue? Find more help at Contact Us.

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

pwiggins — Sun, 09 Dec 2018 01:59:58 GMT

I am having the same problem. Has a solution been found?

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

George_- — Mon, 31 Dec 2018 15:13:45 GMT

Hi pwiggins,

The error described by dnolan is not something we have encountered before and may be caused by th netwok settings. I would recommend resetting your network router then attempt to connect the printer using a different method in the Setup Guide.

If you continue to have trouble, I suggest contacting our telephone or chat support staff by clicking on Contact Us for contact information.

If using a different setup method resolves your issue, please click on the Accept as Solution button so that others may find the answer.

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

tpaton — Mon, 31 Dec 2018 14:37:35 GMT

I am encountering this error as well. My home network is setup where I have multiple APs broadcasting the same SSID due to building materials in my home interfering with signal strength. My MX492 is within 10 feet of one AP. All worked exceptionally well until I meshed multiple APs into one wireless network with a common SSID. Now it says router overlap; no other wireless device in my home takes issue with the new setup. Please advise

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

Nathans9 — Sun, 18 Jul 2021 20:28:15 GMT

did you find the solution to this issue? I am now having this issue also.

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

lkruger — Wed, 11 Aug 2021 23:47:06 GMT

I'm having the same issue on my TR4520: Router Overlap: use a single router.

I only have one router - the one that was listed and that I accepted. Why can't we get a fix from Canon?

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

mary0552 — Sun, 16 Feb 2025 15:35:20 GMT

I am having the same problem. My previous Canon printer MG6620 was easy to set up for wifi. This G620 is a nightmare for AirPrint as many have stated. If Canon continues this, I will have to look for another brand. Too bad, I have really enjoyed all my Canon Photo printers. Plus, why is the setting window so small and very difficult to read. I have to use a flashlight to read it. Come on Canon - you should be very knowledgable about this and have clear directions. Product Expert - what is the solution to connection to wifi? Where can we find clear directions?

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

Stephen — Sun, 16 Feb 2025 16:02:20 GMT

Hi, mary0552.

I'm not a product expert, however, I'd like to offer a couple of tips that might point you in the right direction, if I may?

- If you haven't already, please make sure you've installed the setup software from the Canon website at https://canon.us/G620setup

Regarding the LCD screen on your printer, Canon designs and manufactures a wide variety of printers to meet all our users' needs. We have models without LCDs, with touch panels, and some that can print double-sided. You can see the whole MegaTank lineup at https://canon.us/MegaTank

Back to your printer - if you have our software (and not just the Apple AirPrint driver), and it's still not working, you might want to contact support. They're available Monday through Friday from 9am to 6pm (ET) at 800-OK-CANON (800-652-2666). You may find it easier if you register your printer before calling. You can do that at https://canon.us/account

Re: Pixma MX490 - Router Overlap screen instead of Passphrase screen

mary0552 — Mon, 17 Feb 2025 13:08:13 GMT

Thank you for your kind reply. I finally got it set up to Air PRINT by going to YouTube and watching a video. That video showed me a lot of things Cannon didn’t tell me and I was eventually able to get it connected to my Mac computer.but I did have to choose Single router or something like that after I found my WiFi connection name. I know this isn’t very clear. I set it up yesterday and can’t remember the routine.I set it up yesterday and can’t remember the routine.The bottom line is you have to figure some things out yourself by trial and error and also watch YouTube. Thank you for your reply.