topic Re: TR8520 - cant find on the network in Printer Software & Networking

PIXMA TR8520 - cant find on the network

emsantil2 — Wed, 12 Mar 2025 12:11:47 GMT

Tried looking through the community but cant find a solution. My printer suddenly can't communicate with the network. I noticed it as i tried to print and jobs sat in the que. Worked neither through my PC or smartphone. It's connected to my router which i can see on the printer screen and as a connected device when i check through my router. I've tried all solutions posted.

cycling router/printer on off (specifically turning printer off, unplugging router for several minutes, plugging back in and powering printer back on
I tried resetting to factory and reconnecting to the router. Successfully connected, but still no communication.
I deleted all drivers. When I try to reinstall, the printer can't be found on the network (auto or manual search)
I disabled firewall
ensured frequency was 2.4GHz

Nothing I try seems to be working. Any suggestions?

Re: TR8520 - cant find on the network

Stephen — Wed, 18 Dec 2024 13:51:43 GMT

Hello there!

Welcome to the Canon Community!

Try the automatic setup software at https://canon.us/TR8520Setup

It should automatically uninstall Canon drivers and software on your computer, install the most up-to-date drivers and software, and pair your printer with your WiFi network.

Once you've done that, let us know how it goes.

If you need one-on-one, live assistance, visit https://canon.us/account to determine your support entitlements.

Re: TR8520 - cant find on the network

emsantil2 — Wed, 18 Dec 2024 17:22:07 GMT

Hi,

This did not work. I am stuck on step 2. The printer is still not detected on the network, despite being connected to the wireless router.

Re: TR8520 - cant find on the network

Patrick — Fri, 27 Dec 2024 20:54:32 GMT

Hi emsantil2,

With your PIXMA TR8520 on, please tap the Wi-Fi icon in the lower left corner of your TR8520's display.

If a password message appears, tap Yes.

On the next screen, is the name listed to the right of SSID the same name that your PC is connected to ?

Please scroll down the list, is the number listed next to Signal Strength greater than 50% ?

Lastly, write down the numbers next to IPv4 address.

Next, we will check the conenction:

1. On your computer, please press the Windows key on your keyboard and the letter R, then let both go.

2. In the Run window that appears, please type CMD and click OK.

3. In the Command Prompt window that appears, please type:

PING xxx.xxx.xxx <--where those x's are the number that you wrote down from above. For example: PING 192.168.1.33

4. Then press the Enter key on your keyboard.

Results will appear. In those results, do you see "Timed Out" ? "Destination host unreachable" ? or "Sent = 4, Received = 4, Lost = 0" ?

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: TR8520 - cant find on the network

emsantil2 — Fri, 27 Dec 2024 22:45:55 GMT

Hi, yes, greater than 50%. I tried the command prompt. The result is "destination history is unreachable"

Re: TR8520 - cant find on the network

Patrick — Mon, 30 Dec 2024 15:32:26 GMT

Hi emsantil2,

To keep each device unique, the router will assign each device an IP address.

The device and it's IP address are saved in the router in what is called a "routing table".

"Destination host unreachable" means that the router knows there is a device connected with that IP address, but does not know how to send data to it.

This is caused by an issue with the routing table not being updated on the router.

Typically, turning off the printer, unplugging the router, reconnecting the router and turning the printer back on resolves this issue, as the routing table will refresh.

Please turn your PIXMA TR8520 off.

Next, please go to your router and unplug the power cord from the back of your router.

Wait 1-2 minutes and then reconnect the power cord to your router.

Once back online, please turn your printer back on.

When ready, please follow the steps I provided in my last post to determine the IP address of your printer (it may have changed) and then perform the PING command on your computer using that IP address.

If "Timed Out" and "Destination Host Unreachable" do not appear, please attempt to print.

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: TR8520 - cant find on the network

emsantil2 — Mon, 30 Dec 2024 17:17:02 GMT

Hi Patrick,

I tried this solution previously as I have seen it recommended on other replies. The host was still unreachable. I'll try it again, but what would be the next step if that fails?

Re: TR8520 - cant find on the network

DanielM — Mon, 10 Mar 2025 14:11:47 GMT

Thank you for the suggestion to Ping the printer IP4 from the computer!

I have a similar problem to emsantil2's. My new TR8520 is successfully connected to my home network. When I Ping it from my computer I get a reply:

C:\Users\dmfrn>ping 192.168.1.188

Pinging 192.168.1.188 with 32 bytes of data:
Reply from 192.168.1.188: bytes=32 time=100ms TTL=64
Reply from 192.168.1.188: bytes=32 time=2ms TTL=64
Reply from 192.168.1.188: bytes=32 time=15ms TTL=64
Reply from 192.168.1.188: bytes=32 time=24ms TTL=64

Ping statistics for 192.168.1.188:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 100ms, Average = 35ms

However, when I run the Setup program it can't find my printer on the network. Even when I use the search by IP option it can't find it.

Please advise.

Re: TR8520 - cant find on the network

Patrick — Tue, 11 Mar 2025 20:33:20 GMT

Hi DanielM,

Please try disabling IPv6 on your TR8520. To does this, please follow the steps on this page:

How to Disable IPv6 - TR8520

Once complete, please turn your TR8520 off.

Next, please disconnect the power cord from your router.

Wait 2-3 minutes and reconnect the power cord to your router.

When your Wi-Fi is back online, please turn your PIXMA TR8520 back on and attempt to install on your computer.

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: TR8520 - cant find on the network

DanielM — Tue, 11 Mar 2025 20:56:45 GMT

Thank you. However when I disabled IP6 and ran the set-up program again it still couldn't find the printer.

I did search by IP address and it didn't work.

Re: TR8520 - cant find on the network

emsantil2 — Wed, 12 Mar 2025 02:12:52 GMT

Hi Patrick,

Letting you know I never got a solution to my problem. My printer still doesn't work

Re: TR8520 - cant find on the network

Patrick — Wed, 12 Mar 2025 17:07:09 GMT

Hi emsantil2,

I would unplug the router for a longer period of time, maybe up to 30 minutes.

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: TR8520 - cant find on the network

Patrick — Wed, 12 Mar 2025 17:08:52 GMT

Hi DanielM,

Please install the "Canon PRINT" app on your cellphone.

Making sure that your cellphone and TR8520 are on the same Wi-Fi, please attempt to print.

Were you able to print?

Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.

Re: PIXMA TR8520 - cant find on the network

shadowsports — Wed, 12 Mar 2025 17:43:39 GMT

This thread has become splintered and has two users posting back and forth with product experts. Very difficult to follow as the solutions being offered are different for each user's environment operating system and configuration.

@DanielM please start your own thread so your issue can receive the visibility and attention it deserves. It will also be easier for those of us trying to help. Note I will be watching for your thread and will respond directly. Thanks in advance.

Re: PIXMA TR8520 - cant find on the network

shadowsports — Wed, 12 Mar 2025 17:40:11 GMT

@emsantil2.

This is your thread. Here's what I'd like for you to do.

Please login to your router and look at the list of attached devices. If your printer is connected to the 2.4 GHz broadcast, you will see it listed with the IP address the router has assigned. Now assign a static IP to the printer. If you don't know how to do this, just say so. A static IP address is persistent. It means that the router will not assign the IP you have specified for the printer to other devices. Even if it is shut off, goes to sleep or not used for an extended period.

Let me know once you get the static IP address assigned. Once done you will be able to ping the printer at the IP address you've assigned. Then we will remove the device from your system and re-add it as an IP printer. I will assist you with this process if you are not familiar with it.

Re: PIXMA TR8520 - cant find on the network

DanielM — Wed, 12 Mar 2025 18:49:47 GMT

Will do if I don't get the problem resolved by myself in the next day or so. Question: when I start my thread, how do I move my postings and Patrick's reply into it from the old thread?

Thank you.