https://community.usa.canon.com/t5/Printer-Software-Networking/PIXMA-MX922-not-connected-to-LAN/m-p/518464#M21645 <P>Greetings,</P> <P>Newer eero devices typically come configured for WPA3 encryption only.&nbsp; Your printer only supports wpa2 encryption, so you should be able to use the eero app or log into the router itself and enable wpa3/wpa2 or wpa2 for backward compatibility.</P> Sat, 14 Dec 2024 16:02:53 GMT shadowsports 2024-12-14T16:02:53Z https://community.usa.canon.com/t5/Printer-Software-Networking/PIXMA-MX922-not-connected-to-LAN/m-p/518450#M21630 <P>I've had a Pixma MX922 for a several years and just recently had to replace my wireless network with an EERO 6e model number SO0001.&nbsp; I've had to reconnect all my devices.&nbsp; I have successfully connected my Apple MAC Laptop, Television, 2 iPhones, 2 IPADS and NEST Thermostat but not the printer. &nbsp; The printer sees the correct network however the printer is not prompting for a passcode. Instead after selecting the network it simply goes to 'Connecting to the access point...' message, but that ultimately fails saying to recheck the passphrase. I can't&nbsp; get to the passphrase screen to change the passphrase.</P> Sat, 14 Dec 2024 15:05:41 GMT https://community.usa.canon.com/t5/Printer-Software-Networking/PIXMA-MX922-not-connected-to-LAN/m-p/518450#M21630 alananye 2024-12-14T15:05:41Z https://community.usa.canon.com/t5/Printer-Software-Networking/PIXMA-MX922-not-connected-to-LAN/m-p/518464#M21645 <P>Greetings,</P> <P>Newer eero devices typically come configured for WPA3 encryption only.&nbsp; Your printer only supports wpa2 encryption, so you should be able to use the eero app or log into the router itself and enable wpa3/wpa2 or wpa2 for backward compatibility.</P> Sat, 14 Dec 2024 16:02:53 GMT https://community.usa.canon.com/t5/Printer-Software-Networking/PIXMA-MX922-not-connected-to-LAN/m-p/518464#M21645 shadowsports 2024-12-14T16:02:53Z