https://community.usa.canon.com/t5/Printer-Software-Networking/TS3450-Signal-Strength-amp-Link-Quality-problem/m-p/421994#M14536 <P>Just set-up a new TS3450 and had printing issues talking to the unit via WiFi, all setting seemed correct but after running diagnostics saw that Signal Strength was at 33% and 36% for link quality. Router was in same room about 2M away and WiFi was verified as good.</P><P>After much experimenting and web searching I found that several people had issues with the router being in too close proximity to the printer although usually this was less than 2M. I moved the printer to another room and sat that the SS was 84% and 98% link quality, so some sort of signal degradation or interference when located under 4M from the router. Router is a Sky supplied unit 2.4GHz.</P><P>&nbsp;</P> Mon, 05 Jun 2023 14:02:50 GMT DaveM27 2023-06-05T14:02:50Z https://community.usa.canon.com/t5/Printer-Software-Networking/TS3450-Signal-Strength-amp-Link-Quality-problem/m-p/421994#M14536 <P>Just set-up a new TS3450 and had printing issues talking to the unit via WiFi, all setting seemed correct but after running diagnostics saw that Signal Strength was at 33% and 36% for link quality. Router was in same room about 2M away and WiFi was verified as good.</P><P>After much experimenting and web searching I found that several people had issues with the router being in too close proximity to the printer although usually this was less than 2M. I moved the printer to another room and sat that the SS was 84% and 98% link quality, so some sort of signal degradation or interference when located under 4M from the router. Router is a Sky supplied unit 2.4GHz.</P><P>&nbsp;</P> Mon, 05 Jun 2023 14:02:50 GMT https://community.usa.canon.com/t5/Printer-Software-Networking/TS3450-Signal-Strength-amp-Link-Quality-problem/m-p/421994#M14536 DaveM27 2023-06-05T14:02:50Z