topic Re: SX130 date/time Memory Fail in Point & Shoot Digital Cameras

SX130 date/time Memory Fail

Terentius — Fri, 07 Feb 2020 10:23:34 GMT

My trusty Canon SX130 snapshot compact has suddenly decided not to hold the date and time in memory even between a short short 'off' and then 'on' again.
Every time I power it up now it goes straight to the time and date function which is always blank.

I set the date and time (again), set 'OK', take a few shots, power off then power on again to find that I'm again shown the date and time function is all zeros.
All my recent shots now have an EXIF date/time of 1980:01:01 00:08:02

I'd appreciate any help with this.
Thanks,
Terentius.

Re: SX130 date/time Memory Fail

kvbarkley — Fri, 07 Feb 2020 15:29:32 GMT

Sounds like there is an internal keep-alive battery that has failed. I doubt that it is user serviceable, you will have to call Canon.

Re: SX130 date/time Memory Fail

Terentius — Sat, 08 Feb 2020 00:18:33 GMT

Thanks for your reponse kvbarkley.
Will do.
Terentius.

Re: SX130 date/time Memory Fail

Terentius — Mon, 10 Feb 2020 01:48:02 GMT

I emailed Canon and they kindly replied with the solution.
The time/date memory is from a CR1220 coin type battery in a drawer on the left hand side of the camera shown on page 152 of the SX130IS user manual.

Oh my, I had the manual in front of me.
Dufus syndrome and maybe a touch of senility is my only excuse.

Thanks again and regards,
Terentius.

Re: SX130 date/time Memory Fail

kvbarkley — Mon, 10 Feb 2020 16:17:48 GMT

I am glad my wrong answer could point you to the right direction!