topic Re: Canon PowerShot sx510 HS- unable to set shutter speed in Point & Shoot Digital Cameras

Canon PowerShot sx510 HS- unable to set shutter speed

Whitewolf — Thu, 01 Feb 2018 02:00:53 GMT

I'm trying to set the shutter speed under M mode, in the manual it says to press the +/- button, choose
adjustment of shutter speed or aperture
value, and turn the control dial to specify
a value. Well that's lovely, but that doesn't work. The control dial doesn't turn. I don't know if I'm doing something wrong or if it's broken. Anyone else run into this problem? I know it's not a new camera, but any help would be appreciated! Thanks in advance!

Re: Canon PowerShot sx510 HS- unable to set shutter speed

John_ — Thu, 01 Feb 2018 02:13:52 GMT

Hi and welcome...nice camera! I think there should be a ring that goes around that dial that turns and not the dial itself

Re: Canon PowerShot sx510 HS- unable to set shutter speed

Whitewolf — Thu, 01 Feb 2018 02:18:39 GMT

Thanks for the welcome! Right, it's a little ridged ring. It turns a little, but it doesn't change the shutter speed. I believe it's broken, but I was hoping it wasn't. Oh well, thanks for the help!

Re: Canon PowerShot sx510 HS- unable to set shutter speed

John_ — Thu, 01 Feb 2018 02:28:13 GMT

Your welcome! There is a circuit board under that ring that reacts to it turning and makes the changes. If it's not some weird setting then I suspect either the ring and/or that circuit board have failed. You did a reset to defaults and the other one where you remove the battery and press the on button for at least 30 seconds then replace battery and retry?

Re: Canon PowerShot sx510 HS- unable to set shutter speed

Whitewolf — Thu, 01 Feb 2018 02:41:33 GMT

I did try both of those, no luck. Serves me right for buying a used camera! Thanks again!