topic Re: Plotting on Canon ipf605 in Office Printers

Plotting on Canon ipf605

davidv — Fri, 13 Dec 2019 10:38:34 GMT

I am having had difficulty in getting acceptable plot quality from the ipf605 when printing direct from Autocad. (Previous and latest release) The line thicknesses are all too thick and the variation in thickness in the plot style dialogue box makes little if any difference. Printing to PDF then plotting the same drawing results in a much finer and acceptable plot. In fact settings in the plot dialogue box seem to make no difference to line weight when printing direct from Autocad. The plotter is obviously capable but there must be settings that I am unaware of outside the usual dialogue boxes that will allow the plotter to perform direct from AutoCAD successfully

Re: Plotting on Canon ipf605

davidv — Mon, 16 Dec 2019 11:26:46 GMT

Anybody at Canon able to help?

Re: Plotting on Canon ipf605

Porcha — Mon, 16 Dec 2019 13:15:56 GMT

Hi davidv ,

The Canon Community Forum is not for immediate assistance. If this is a time-sensitive matter, click HERE search our knowledge base or find additional support options HERE. You can also contact technical support at 1-800-OK-CANON (1-800-652-2666) Monday-Friday 8 am to 8 pm ET, excluding holidays.

We hope this helps!

Re: Plotting on Canon ipf605

Darius — Mon, 16 Dec 2019 20:10:29 GMT

Hi davidv.

The imagePROGRAF 605 is a dealer-supported model. Check the side and back of the printer for a sticker with the dealer's information. If no such sticker or information is available for the printer, you may contact Canon Solutions America (800-815-4000) for help finding a nearby dealer with whom you may establish a contract.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.