Imageclass D1350 laserjet printer problem

Xav001 — Wed, 13 Mar 2019 23:38:41 GMT

I have recently gotten this hand me down printer. it works fine but the prints turn out with a bunch of gray around the text. like its printing a little allover the page. Any idea what could cause this ? i have just put a new toner cartridge in and it didnt fix the problem. Thanks

Re: Imageclass D1350 laserjet printer problem

Patrice — Tue, 19 Mar 2019 21:26:58 GMT

Hi Xav001.

It is recommended that a fixing unit cleaning be performed. Please follow the steps below to perform the cleaning:

1. Press [ ] (Menu).

2. Select <Adjustment/Maintenance> using [ ] or [ ] and press [OK].

3. Select <Clean Fixing Unit> using [ ] or [ ] and press [OK].

4. Check if the supported paper is set in the paper drawer, and press [OK].

5. Check the procedure shown in the display, and press [OK].

* The cleaning paper will be printed.

6. Load the cleaning paper to the multi-purpose tray with the black band side up.

7. Check the screen and press [OK].

The cleaning begins. It takes approximately 80 seconds to complete the process.

* We recommend that plain paper be loaded when cleaning the fixing unit.

NOTE:

When the cleaning does not start

You cannot use this function when jobs are stored in memory.

8. Press [ ] (Menu) to close the menu screen.

You may also want to try a few of the special modes to prevent this issue. Please follow the steps at this link to enable the modes:

Setting Special Modes

If you continue to experience an issue, or need any further assistance, please call us at 1-800-OK-CANON (652-2666), Monday - Friday 10:00 a.m. to 6:30 p.m. ET (excluding holidays).

topic Re: Imageclass D1350 laserjet printer problem in Office Printers

Imageclass D1350 laserjet printer problem

Re: Imageclass D1350 laserjet printer problem