topic ImageRunner 2030 - replace fuser in Office Printers

ImageRunner 2030 - replace fuser

pal_noc — Tue, 28 Jan 2014 20:20:05 GMT

Hi,

I just replaced the fuser unit on my 2030 and the paer says to then initialize the counter as follows:

[settings/registration]>Adjusment/Maintenance > Maintenance > initialize after replacing parts > fixing unit.

When I go to [settings/registration]>Adjusment/Maintenance > Maintenance

I dont see the option: initialize after replacing parts > fixing unit

Does anyone know how to do this?

Re: ImageRunner 2030 - replace fuser

Danny — Tue, 28 Jan 2014 20:54:06 GMT

Hi, pal_noc! Thanks for posting!

Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area!

Re: ImageRunner 2030 - replace fuser

pal_noc — Wed, 05 Feb 2014 10:52:48 GMT

Thanks for replying, but that does not help at all. What's the use of a forum if you are going to send me elsewhere?

I cannot believe that a simple thing like this needs the help of a dealer.

Not an accepted solution.