topic Re: MF4450 and Windows 10: Impossible? in Office Printers

MF4450 and Windows 10: Impossible?

j4450 — Wed, 29 Jul 2015 18:16:38 GMT

Can the ImageCLASS MF4450 printer/scanner (and MF Toolbox software) just not be used with Windows 10, period? I've tried reinstalling the drivers in Compatibility mode and everything else I know of

Any guidance?

Frustrating, because this printer isn't all that old.

Re: MF4450 and Windows 10: Impossible?

Danny — Wed, 29 Jul 2015 18:10:56 GMT

Hi, j4450!

So that the Community can help you better, we will need to know exactly which Canon printer model you're using. At the moment, we do not have any printers in our lineup with the "ImageWriter" name, but we do make a printer called the imageCLASS MF4450. Is this the one you're using? That, and any other details you'd like to give will help the Community better understand your issue!

If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 8 AM and 8 PM ET (5 AM to 5 PM PT).

Thanks and have a great day!

Re: MF4450 and Windows 10: Impossible?

j4450 — Wed, 29 Jul 2015 18:13:18 GMT

Yes, ImageCLASS MF4450 Black & White Laser Multifunction Printer Item Code: 4509B021. This one: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf4450

My apologies for the error.

Re: MF4450 and Windows 10: Impossible?

mcalleja — Tue, 03 Nov 2015 00:13:01 GMT

any luck with this issue I am experiencing same thing with scanner. can not connect to scanner.

Re: MF4450 and Windows 10: Impossible?

prmehra — Fri, 18 Dec 2015 07:54:14 GMT

Canon image class MF4450 scanner does not work in Windows 10. I've downloaded the driver mny times over. But NO success. Can anyone please HELP in solving this problem.The printer is not very old. It was working well till I upgraded to Win 10. Shld one revert back to Win 8.1

Re: MF4450 and Windows 10: Impossible?

bobfeather — Fri, 01 Jan 2016 23:21:50 GMT

is there a resolution to this ? my image class 4450 has sucked for scanning ever since i - up graded to windows 10

i re-down load the soft ware, it works for a day or so & then zip nada **bleep**

have to re-load soft ware same crap, next day it don't work

if i gotta go buy a new scanner it sure won't be cannon

Re: MF4450 and Windows 10: Impossible?

rrao2001 — Tue, 09 Feb 2016 01:52:06 GMT

To the Canon Moderator-

How come you have not responded to this question?

It's been months and I'm hoping that you have an official resolution to this issue.

Raj

Re: MF4450 and Windows 10: Impossible?

sferrell615 — Fri, 19 Feb 2016 02:33:46 GMT

it's not just you.

a reboot 'should' fix it as there is a 'limitation' that canon is aware of for windows 8 & 10.

but if that doesn't fix it, some have reported that 1 of the following has fixed it for them:

adding the mf toolbox to their antivirus (e.g. bitdefender) firewall
re-installing the latest available driver
setting the "RPC (locater)" service to automatic and ending the "Service Host: Windows Image Acquisition" process via Task Manager and 'abandoning data'
restoring their computer to a point prior to a visual c++ install and then disabling the "Windows Update" service

http://community.usa.canon.com/t5/Office-Printers/MF-Toolbox-doesn-t-work-on-Windows-10/m-p/164671/highlight/false#M4006

latest available driver: https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-laser-printers-imageclass/imageclass-mf4370dn/imageclass-mf4370dn#drivers_downloads_tab

Re: MF4450 and Windows 10: Impossible?

csiu — Fri, 11 Mar 2016 02:49:38 GMT

I have same problem. After downloading Window 10 version (64 bit) it works occasionally. Whenever there is a Window update I have to reinstall the ToolBox. However after the latest update, I cannnot start the ToolBox, it said

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application even log or use the command-line sxstrace.exe tool for more detail"

Re: MF4450 and Windows 10: Impossible?

Shaunrom — Tue, 03 May 2016 02:10:24 GMT

I have the same issue. I cannot open the Canon MF Toolbox ver4.9 because it says "the application has failed to start because its side-by-side configeration is incorrect. Please see the application event log of us eth command-line sxstrace.exe tool for more details."

I am ussing a ImageCLASS MF4450 on Windows 10. Prior to windows 10 i was using win 7 and i never had an issue.

Canon ImageCLASS MF4450 Monochrome Laser ‑ Fax / copier

Re: MF4450 and Windows 10: Impossible?

RockyDen — Thu, 16 Jun 2016 13:41:35 GMT

Any solution to the scanning issue. I've been patiently waiting...Canon please provise us users any update.

Re: MF4450 and Windows 10: Impossible?

ktimberlakes — Mon, 04 Jul 2016 02:59:15 GMT

best solution, just left my mf4450 next to the trash can, and will buy other brand. Sick of reinstaling in safe mode toolbox 4.9 and drivers for canon scanner printer. Every time, when i need to scan my paperwork have to re do that on win10.

Re: MF4450 and Windows 10: Impossible?

sferrell615 — Fri, 29 Jul 2016 03:42:20 GMT

i posted this on http://community.usa.canon.com/t5/Office-Printers/MF-Toolbox-doesn-t-work-on-Windows-10/m-p/180142/highlight/false#M4688 as well

previously, i had installed the latest SW and driver, changed the WIA service (steps below), and it fixed the scan issue but i couldn't initiate the scan via the start button on the imageclass (4370dn).

i haven't done 'extensive' testing but the NetworkUSBScanPatchEN.exe patch from 7/7/2016 appears to have fixed the scan issue on imageclass (4370dn) and i can initiate the scan via start button on the imageclass as well.

in particular, i recall that if you scan, disconnect computer from imageclass, power off imageclass, power on imageclass, reconnect computer to imageclass, then scan again it wouldn't work. now it does.

i listed steps that i recommend for updating SW and drivers as well. i'll respond back if i run into issues. but i have a feeling canon finally (a year later) resolved this issue.

steps for changing WIA service (in case the NetworkUSBScanPatchEN.exe patch doesn't fix your scan issue):

Select Start
Enter services.msc
Select the Services Desktop App
1. Scroll down to Windows Image Acquisition (WIA)
2. Right-Click Windows Image Acquisition (WIA) and select Properties
  1. Select the General tab
    1. Make sure that the Startup Type is set to Automatic
  2. Select the Log On tab
    1. Select the box next to Local System account
    2. Select the box next to Allow service to interact with desktop
  3. Select the Recovery tab
    1. Select the First Failure drop-down
    2. Select Restart the Service
    3. Repeat for Second Failure and Third Failure
    4. Leave Reset Service After set to 1 minutes
    5. Select the box next to Enable actions for stops with errors
  4. Select Apply then OK
Reboot

steps i recommend to update SW and drivers:

reboot

uninstall mf###-###

reboot

uninstall canon mf toolbox ####.mf##

reboot

install mf####-###

reboot

install canon mf toolbox ####.mf##

reboot

Re: MF4450 and Windows 10: Impossible?

mcalleja — Fri, 29 Jul 2016 14:55:13 GMT

thanks,

the patch worked for me as well.

Re: MF4450 and Windows 10: Impossible?

roscoc — Wed, 13 Sep 2023 05:17:41 GMT

Thanks, this still works. Recently did a fresh install on my computer and could no longer get the printer working. This fixed it.