topic Re: MF753 remote UI in Office Printers

MF753 remote UI

cyberwasp — Sun, 02 Jul 2023 02:34:32 GMT

On this printer, is there a way to turn on Remote ui after the setup process is complete. I went through all of the menus but couldn't find a place to turn it on. Is it only available during setup? TIA

Re: MF753 remote UI

shadowsports — Sun, 02 Jul 2023 03:20:03 GMT

Greetings,

You can access the remote UI using a web browser.

See this for assistance:

Starting Remote UI - Canon - imageCLASS MF753Cdw / MF751Cdw - User's Guide (Product Manual)

Note you will need to create a PIN during set up. Keep this in a safe place.

Re: MF753 remote UI

cyberwasp — Sun, 02 Jul 2023 12:06:19 GMT

On my printers control panel when turn on there is a general tab listing ways to print. There is no Menu button. I've gone through the six Custom tabs. None of which have a " Management Settings License/Other1 Remote UI Settings" anywhere to be found.

Re: MF753 remote UI

shadowsports — Sun, 02 Jul 2023 13:23:45 GMT

Greetings,

Did you see the reference from the user guide I posted? Enter the machine's IP address in a browser. This opens the remote UI on the printer's webserver.

Re: MF753 remote UI

cyberwasp — Sun, 02 Jul 2023 13:38:54 GMT

Yes I did that only to receive the message:

At the printer there is no management setting menu as described in the link you have abouve. The only thing I could find on the menus for remote ui was under application library guide that show a nice little photo of a address bar.

Re: MF753 remote UI

cyberwasp — Sun, 02 Jul 2023 15:01:50 GMT

Rick. Sorry, I finally got to log in. The Menu button was not showing up, so I did a full reset and more menus appeared including "Menu. Thank you!!!!

Re: MF753 remote UI

shadowsports — Sun, 02 Jul 2023 15:20:17 GMT

All I did was point you in the right direction 😃. You figured it out. Good work.