topic Mf644cdw won’t do anything right PLEASE HELP in Office Printers

Mf644cdw won’t do anything right PLEASE HELP

Eddybravo — Sun, 21 Mar 2021 19:31:20 GMT

Print comes out,faded out of line. It won’t let me do cleaning it won’t let me do a full adjumnent. It use to print fine. Now it’s all faded, spots and white areas that don’t get color. It won’t let me configure. Toners are 90 percent full ink density a lot. I’m using 3rd party toner but that’s it everything else I’ve done won't work.

Re: Mf644cdw won’t do anything right PLEASE HELP

Eddybravo — Sun, 21 Mar 2021 23:16:06 GMT

https://youtu.be/osSCjDVPqRY

Re: Mf644cdw won’t do anything right PLEASE HELP

shadowsports — Tue, 23 Mar 2021 04:32:22 GMT

I'm not sure what to say. This is not my experience.

I've had my Pixma 100 for over a year

My 644 about a month

and 2 LBP226dw

Like others, I did recenty experience the partial printing issues with some W10 devices that received the KB500802 and KB500808 updates on or after 3/9.

This was resolved by applying the hotfixes released by MS the following week. PITA for sure. About 1/3 of the users in one office lost the ability to print reliably for a few days.

I don't use 3 party inks/toners. I've seen them work really well and other times, not good at all. I assume your printer worked at one time with OEM toner. All of things you are describing. Faded colors, incorrect rendition, alignment issues can all result from using lower quality "compatible" inks or toners.

Whats keeping you from printing a test pattern, cleaning or alighment? You just say "can't" or "won't" which doesn't really tell us what you did or what happeneded when you did it?

I suggest you try Canon toner before deciding your printer is the problem.

Re: Mf644cdw won’t do anything right PLEASE HELP

Eddybravo — Tue, 23 Mar 2021 07:55:14 GMT

I just bought another printer if imma buy new ink might as well get a new printer hahahah so imma see what’s up but it won’t let me wuick adjust won’t let me full adjust won’t let me do anything it says could not be performed OVER AND OVER AND OVER OVER. It say printing...... beep beep beep. Could not be performed blank blank blank..

Re: Mf644cdw won’t do anything right PLEASE HELP

Hector — Wed, 12 May 2021 20:10:15 GMT

Hello Eddybravo,

The Canon genuine toner cartridges have chips on them that gives the printer information. The chip gives the toner level to the printer and allows you to perform print quality adjustments. If you are using third party toners you will not be able to perform certain adjustment to the print quality or perform certain maintenace functions. The Image does look like a toner issue. You can try reseating the toner and giving them a slight shake to make sure the toner is evenly distributed inside of the cartridge. If that does not resolve the issue, I would suggest trying genuine Canon toner cartridges.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.